KLINGER® Quantum

Unique gasket material with highest flexibility at high temperatures

KLINGER Quantum is a unique gasket material with highest flexibility at high temperatures.

Basis

High-quality fiber and filler compound bonded in a high temperature resistant HNBR-Matrix.

Areas of application

This material is suitable for the use in oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Key features

Unique HNBR matrix
Special curing technology
Resistant to creep and cold flow
Dimensionally stable

Benefits

Superior long-term flexibility at higher temperatures
Outstanding temperature resistance
FDA conformity

Typical technical data for thickness 2.0 mm

↔ Swipe horizontally to see all values.

Compressibility ASTM F 36 J		%	10
Recovery ASTM F 36 J		%	50
Stress relaxation DIN 52913	50 MPa, 16 h / 175 °C 50 MPa, 16 h / 300 °C	MPa MPa	32 30
Stress relaxation BS 7531	40 MPa, 16 h / 300 °C	MPa	29
KLINGER cold/hot compression 50 MPa	thickness decrease at 23 °C thickness decrease at 300 °C thickness decrease at 400 °C	% % %	10 14 20
Tightness	DIN 28090-2	mg/s x m	0.02
Specific leakrate λ	VDI 2440	mbar x I/s x m	4.4E-08
Thickness increase after fluid immersion ASTM F 146	Oil IRM 903: 5 h / 150 °C Fuel B: 5 h / 23 °C	% %	3 5
Density		g/cm³	1.7
Average surface resistance	ρO	Ω	7.7x10E12
Average specific volume resistance	ρD	Ω cm	4.7x10E12
Average dielectric strength	E_d	kV/mm	18.5
Average power factor	50 Hz	tan^δ	0.064
Average dielectric coefficient	50 Hz	εr	6.8
Thermal conductivity	λ	W/mK	0.44
Classification acc. to BS 7531:2006	Grade AX

ASME-Code sealing factors

↔ Swipe horizontally to see all values.

for gasket thickness 1.0 mm	tightness class 0.1 mg / s x m	MPa	y 15 m 1.1
for gasket thickness 2.0 mm	tightness class 0.1 mg / s x m	MPa	y 15 m 2.5
for gasket thickness 3.0 mm	tightness class 0.1 mg / s x m	MPa	y 15 m 3.8

Dimensions of the standard sheets

↔ Swipe horizontally to see all values.

Sizes	2000 x 1500 mm
Thicknesses	0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
Tolerances	Thickness acc. to DIN 28091-1 Length ±50 mm, Width ±50 mm

Other thicknesses, sizes and tolerances on request.

Function and durability

The performance and service life of KLINGER gaskets depend to a large extent on proper storage and fitting – factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our Installation manual.