KLINGER^®Quantum

KLINGERSIL^®

KLINGER^®top-sil

KLINGER^®top-graph

KLINGER^®top-chem

   › top-chem2000
   › top-chem2003
   › top-chem2005
   › top-chem2006

KLINGER^®soft-chem

KLINGER®expert
Download

Media resistance

Our company

Our Partners

News

Contact

Home

ESA Guidelines  
   Guidelines for safe 
   seal usage 

Characteristic & main applications
KLINGERtop-chem-2005 has excellent chemical resistance in strongly acidic applications and is suitable for a wide range of applications in the chemical industrie.
It has good mechanical properties at medium temperatures and loads.
The material is the economical alternative at the usage of modified PTFE gaskets.

Material
PTFE-Basis

pT diagram

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid.

Technical Data
    

Typical values for 1,5 mm thickness
Ref. thickness of measured values		mm	1,5
Density		g/cm3	2,2
Compressibility ASTM F 36 J		%	3
Recovery ASTM F 36 J		%	40
Stress relaxation DIN 52913	30 MPa, 16 h/150 °C	MPa	25
cold/hot compression	23 °C / 50 MPa	%	10
	250 °C / 50 MPa	%	30
Tightness	DIN 3535/6	ml/min	0,2
	DIN 28090-2	mg/s m	0,02
Tightness/weight increase	H2SO4: 100%, 18 h/23 °C	%	1/1
	HNO3: 100%, 18 h/23 °C	%	1/2
	NaOH: 33%, 72 h/110 °C	%	-

Technical advice
KLINGERexpert (pdf, 410KB)
The many, varied demands placed on gaskets
Gasket selection with the pT diagram
Product documentation (pdf, 916KB)
KLINGER Hot and Cold compression test method
High temperature tightness
Surface pressures acc. DIN 28090
Gasket factors acc. DIN 28090 and EN 13555
Inspection results of the gasket parameters acc. EN13555
Chemical compatibility

Technical support
Application overview (pdf, 525KB)
Important application parameters (pdf, 410KB)
Installation instructions (pdf, 421KB)
Shelf life of KLINGERSIL
Material safety data sheet (pdf, 83KB)
Technical presentations
Welding of KLINGER^®top-chem (zip/pdf, 7.628KB)
Approvals and certificates

Dimensions of the standard sheets
Sizes: 1500 x 1500 mm
Thicknesses: 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm
Tolerances: thickness ± 10%, lenght ± 50 mm, width ± 50mm
Other thicknesses and sizes on request.

Function and durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.