Deutsch
English
KLINGER® top-sil-ML1 Multilayer
Multilayer material concept (pdf, 1.340KB)
Characteristic & main applications
Unique Multi-Layer material concept – A milestone for fibre reinforced gaskets.
Suitable for use with oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants, food industry. Outstanding performance in many applications.
Material
Revolutionary combination of synthetic fibres and different elastomers bound in a Multi-layer structure.
Technical data
| Compressibility ASTM F 36 J |
% | 9 | |
| Recovery ASTM F 36 J |
min. | % | >50 |
| Stress relaxation DIN 52913 |
50 MPa, 16 h/175 °C | MPa | 34 |
| 50 MPa, 16 h/300 °C | MPa | 28 | |
| Stress relaxation BS 7531 |
40 MPa, 16 h/300 °C | MPa | - |
| Klinger cold/hot compression 50 MPa | thickness decrease at 23 °C | % | 8 |
| thickness decrease at 300 °C | % | 15 | |
| Tightness according DIN 3535/6 | mg/s x m | <0,1 | |
| Thickness increase after fluid immersion ASTM F 146 |
oil IRM 903: 5 h/150 °C | % | 4 |
| fuel B: 5 h/23 °C | % | 8 | |
| Density | g/cm3 | 1,7 | |
| Meets the technical requirements of BS 7531:2006 Grade AX |
Technical advise
KLINGERexpert
The many, varied demands placed on gaskets
Gasket selection with the pT diagram
Product documentation
KLINGER Hot and Cold compression test method
High temperature tightness
Surface pressures acc. DIN 28090
Gasket factors acc. DIN 28090 and EN 13555
Chemical compatibility
Technical Support
Application Overview
Important application parameters
Installation instructions
Shelf life of KLINGERSIL
Safety Information
Technical presentation
Approvals and certificates
Dimensions of the standard sheets
Sizes: 1000 x 1500 mm, 1500 x 2000mm
Thicknesses: 0,8 mm, 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm
Tolerances: thickness ± 10%, lenght ± 50 mm, width ± 50mm
Other thicknesses and sizes on request.
Function and durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.
 |
 |
