Deutsch
English
KLINGER® soft-chem
Characteristic & main applications
Excellent corrosion resistance together with superior creep resistance and sealability create a high-grade gasket material for a wide application field.
The best choice for economical plant-wide use on services to 260°C and pressures to 200 bar.
Material
Expanded PTFE material.
Technical data
| Compressibility ASTM F 36 J |
% | 50-60 | |
| Recovery ASTM F 36 J |
min. | % | 13-17 |
| Stress relaxation DIN 52913 |
30 MPa, 16 h/150 °C | MPa | 15 |
| Klinger cold/hot compression Klinger 25 MPa |
thickness decrease at 23 °C | % | 35 |
| thickness decrease at 150 °C | % | 30 | |
| Tightness according DIN 28090 | mg/s x m | 0,01 | |
| Chemical resistance | pH | 0-14 | |
| Density | g/cm3 | 0,9 |
Technical advise
KLINGERexpert
The many, varied demands placed on gaskets
Gasket selection with the pT diagram
Product documentation
KLINGER Hot and Cold compression test method
High temperature tightness
Surface pressure acc. DIN 28090
Gasket factors
Chemical compatibility
Technical Support
Application Overview
Important application parameters
Installation instructions
Shelf life of KLINGERSIL
Safety Information
technical presentation
Approvals and certificates
Dimensions of the standard sheets
Sizes: 1500 x 1500 mm, ± 10%
Thickness: 1,5 mm, 2,0 mm, 3,0 mm
Tolerances: thicknesses -10%/+20%, length ± 50 mm, width ± 50mm
Other thicknesses and sizes on request
Function and durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.
 |
 |
