 KLINGER®Quantum
KLINGERSIL®
KLINGER®top-sil
›
KLINGER®top-sil-ML1
KLINGER®top-graph
KLINGER®top-chem
KLINGER®soft-chem
KLINGER®expert
 Download
Media resistance
Our company
Our
Partners
News
Contact
Home
ESA Guidelines
Guidelines for safe
seal usage |
|
KLINGER®top-sil-ML1
Multilayer
Multilayer
material concept (pdf, 1.335KB)
 Characteristic
& main applications
Unique
Multi-Layer material concept – A milestone for fibre reinforced gaskets.
Suitable for use with oils, water, steam, gases, salt solutions, fuels,
alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants
and refrigerants, food industry. Outstanding performance in many
applications.
Material
Revolutionary combination of synthetic fibres and
different elastomers bound in a Multi-layer structure.
 pT
diagram
The Klinger pT diagram provides
guidelines for determining the suitability of a particular gasket material
for a specific application based on the operating temperature and pressure
only. Always refer to the
chemical resistance of the gasket to the fluid.
Technical Data
|
Typical values for 2 mm
thickness |
Compressibility
ASTM F 36 J |
|
% |
9 |
Recovery
ASTM F 36 J |
min. |
% |
>50 |
Stress relaxation
DIN 52913 |
50 MPa,
16 h/175 °C |
MPa |
34 |
| 50 MPa,
16 h/300 °C |
MPa |
28 |
Stress relaxation
BS 7531 |
40 MPa,
16 h/300 °C |
MPa |
- |
|
Klinger cold/hot
compression 50 MPa |
thickness decrease at 23 °C |
% |
8 |
|
thickness decrease at 300 °C |
% |
15 |
|
Tightness according DIN 3535/6 |
|
mg/s
x m |
<0,1 |
Thickness increase after
fluid immersion
ASTM F 146 |
oil IRM
903: 5 h/150 °C |
% |
4 |
| fuel B:
5 h/23 °C |
% |
8 |
| Density |
|
g/cm3 |
1,7 |
Meets the technical requirements
of
BS 7531:2006 Grade AX |
Technical advice
KLINGERexpert (pdf,
410KB)
The many, varied demands placed on gaskets
Gasket selection with the pT diagram
Product documentation
(pdf, 1.259KB)
KLINGER Hot and Cold compression test method
High temperature tightness
Surface pressures acc. DIN 28090
Gasket factors acc. DIN 28090 and EN 13555
Chemical compatibility
(pdf, 560KB)
Technical support
Application overview
(pdf, 525KB)
Important application
parameters (pdf, 410KB)
Installation instructions (pdf,
421KB)
Shelf life of KLINGERSIL (pdf,
408KB)
Material safety
data sheet
(pdf, 83KB)
Technical presentations
Approvals and certificates
Dimensions of the standard
sheets
Sizes: 1000 x 1500 mm,
1500 x 2000mm
Thicknesses: 0,8 mm, 1,0 mm, 1,5 mm,
2,0 mm, 3,0 mm;
other thicknesses and sizes on request.
Tolerances: thickness ± 10%,
lenght ± 50 mm, width ± 50mm
Function and
durability
The performance and service
life of KLINGER gaskets depend in large measure on proper storage and
fitting, factors beyond the manufactor’s control. We can, however, vouch
for the excellent quality of our products. With this in mind, please also
observe our installation instructions.
|
