KLINGER^®Quantum

KLINGERSIL^®

   › C-4106
   › C-4243
   › C-4265
   › C-4300
   › C-4304
   › C-4324
   › C-4400
   › C-4408
   › C-4409
   › C-4430
   › C-4433
   › C-4438
   › C-4500
   › C-4509
   › C-6307
   › C-6327
   › C-8200

KLINGER^®top-sil

KLINGER^®top-graph

KLINGER^®top-chem

KLINGER^®soft-chem

KLINGER®expert
Download

Media resistance

Our company

Our Partners

News

Contact

Home

ESA Guidelines  
   Guidelines for safe 
   seal usage 

Characteristic & main applications
Gaskets for liquids and gaseous media at lower pressures and temperatures and low bolt loads.
Good resistance against oils, hydrocarbons, refrigerants and other chemicals.

Material
Mineral Fibres bonded with NBR.

pT diagram

The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid.

Technical Data
    

Typical values for 1,0 mm thickness
Compressibility ASTM F 36 J		%	26
Recovery ASTM F 36 J	min.	%	>50
Klinger hot compression 50 MPa	thickness decrease at 23°C	%	12
	thickness decrease at 200°C	%	15
Tightness acc. DIN 28090		mg/s x m	<0,02
Thickness increase ASTM F 146	oil IRM 903: 5 h/150 °C	%	<10
	fuel B: 5 h/23 °C	%	<15
Density		g/cm3	1,6

Technical advice
KLINGERexpert
The many, varied demands placed on gaskets
Gasket selection with the pT diagram
Product documentation
KLINGER Hot and Cold compression test method
High temperature tightness
Surface pressures acc. DIN 28090
Gasket factors acc. DIN 28090 and EN 13555
Chemical compatibility

Technical support
Application overview
Important application parameters
Installation instructions
Shelf life of KLINGERSIL
Material safety data sheet
Technical presentations
Approvals and certificates

Dimensions of the standard sheets
Sizes: 2000 x 1500 mm
Thicknesses: 0,5 mm, 0,8 mm, 1,0 mm, 1,5 mm, 2,0 mm;
other thicknesses and sizes on request.
Tolerances: thickness ± 10%, lenght ± 50 mm, width ± 50mm

Function and durability
The performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions.